Five Analog Channels
ABOLI is a five-channel fully analog mixer, designed and handcrafted in Tehran. Each channel can run in Rotary or Linear (fader) mode, so the layout follows the way you play.
Analog Spring Reverb
An onboard analog spring reverb can be assigned from any channel with the FX button. Its output level mixes the effect back with the dry signal. When the reverb is not in use, set that level to zero.
Isolator, EQ, and Meters
A three-band full-cut isolator (High, Mid, Low) sits on the master with a bypass switch. Every channel has its own three-band EQ and a stereo VU meter, and the master has a stereo VU for the final output. Booth has a separate two-band EQ.
Two Cues and Full I/O
Two headphone outputs, each 2W on a 6.3 mm jack, can take any channel or the return on Cue 1, Cue 2, or both, with pre/post EQ and a cue-to-master pan. Channels 1–4 switch between line and RIAA phono. Channel 5 adds an XLR microphone input with a +38 dB preamp and 15V phantom. Master 1 is balanced XLR, Master 2 is unbalanced TS, and booth is available on both, plus send and a stereo RCA record output.
Key Specifications
Mixing Channels
5 channels, each Rotary or Linear, gain from -18 dB to +14 dB
Phono
5 RCA phono inputs with RIAA filtering
Microphone
XLR on channel 5, +38 dB preamp, 15V phantom
Isolator
3-band full-cut (High, Mid, Low) with bypass
Spring Reverb
Analog, assignable per channel, with its own level
Power Supply
100–240V AC or 36–300V DC, noise held to 40 µV





